The water filter on a Samsung Twin Cooling Plus refrigerator plays a crucial role in ensuring the purity and great taste of your water and ice. To keep your refrigerator performing at its best, it’s essential to replace the water filter every six months. This comprehensive guide will walk you through the step-by-step process of changing the water filter on your Samsung Twin Cooling Plus refrigerator, providing you with technical specifications and a detailed DIY tutorial.
Technical Specification of How to Change Water Filter Samsung Twin Cooling Plus
The water filter on a Samsung Twin Cooling Plus refrigerator is typically located inside the refrigerator compartment and is designed to enhance the taste of your water, reduce odor, and remove particles. The filter should be replaced every six months to ensure optimal performance.
The filter indicator light on your refrigerator panel helps you monitor the usage of the filter. When the filter indicator is blue or green, your filter still has at least 90 percent of its usage left. When the indicator light turns orange, there is less than 10 percent of usage left, and when it turns red, the filter is over its maximum usage and needs to be replaced immediately.
The water filter on a Samsung Twin Cooling Plus refrigerator has the following technical specifications:
| Specification | Value |
|---|---|
| Filter Type | Activated Carbon |
| Filter Capacity | 300 gallons or 6 months |
| Filter Dimensions | 2.63 x 9.88 inches |
| Replacement Filter Model | DA29-00020B |
When installing a new water filter, it’s important to turn off the water supply and dispense some water to reduce the water pressure. This will make it easier to remove and replace the filter. It’s also a good idea to have a towel or bowl ready, as water may spill while changing the filter.
After installing the new filter, be sure to reset the water filter indicator by pressing the ice type button for 3 seconds, or by pressing the ice type button and the child lock button simultaneously for 3 seconds, depending on your refrigerator model.
For added convenience, all Samsung refrigerators with an external dispenser have an indicator light on the display that reminds you when it’s time to replace your water filter.
How to Change Water Filter Samsung Twin Cooling Plus DIY
To change the water filter on a Samsung Twin Cooling Plus refrigerator, follow these DIY steps:
-
Turn off the water supply: Before starting the process, turn off the water supply to your refrigerator. This can typically be done by locating the shut-off valve behind the refrigerator or under the sink and turning it clockwise to the closed position.
-
Locate the filter: The water filter on a Samsung Twin Cooling Plus refrigerator is typically located inside the refrigerator compartment, either on the top, bottom, or side wall. Refer to your user manual or the manufacturer’s website to determine the exact location for your model.
-
Remove the old filter: To remove the old filter, turn it counterclockwise while pulling it out or down. If you’re having trouble removing it, try using a pair of channel lock pliers to grip the filter and turn it counterclockwise.
-
Install the new filter: Before installing the new filter, make sure to turn the water supply back on and dispense some water to reduce the water pressure. Then, open the new filter cartridge from its packaging and remove the blue protection cap. Insert the new filter cartridge with the locked symbol pointing to the left, push it in, and turn it clockwise until it stops. The locked symbol should now be lined up with the indicator line.
-
Purge the system: After installing the new filter, dispense water for about six minutes or around three gallons to purge the system. This will help remove any air pockets and ensure that the new filter is working properly.
-
Reset the water filter indicator: Depending on your refrigerator model, you may need to reset the water filter indicator by pressing the ice type button for 3 seconds, or by pressing the ice type button and the child lock button simultaneously for 3 seconds. Refer to your user manual for the specific instructions for your model.
-
Check for leaks: After installing the new filter, open the refrigerator door and check for any leaks around the filter area. If you notice any drips or water pooling, tighten the filter slightly or check for proper installation.
By following these DIY steps, you can easily change the water filter on your Samsung Twin Cooling Plus refrigerator and ensure that you’re enjoying clean and fresh-tasting water with every pour.