The Aztec electric boiler is a popular choice for residential and commercial heating systems, known for its reliability and energy-efficiency. At the heart of this boiler lies the reset button, a crucial component that allows users to quickly resolve any lockouts or faults that may occur during operation. This comprehensive guide will delve into the intricacies of the Aztec electric boiler reset button, providing step-by-step instructions and technical specifications to ensure your heating system runs smoothly.
Identifying the Issue
The first step in resetting the Aztec electric boiler is to identify the problem. The boiler is equipped with a red LED light that will illuminate when a lockout or fault has occurred. By carefully observing the status of this indicator light, you can quickly determine the nature of the issue and proceed with the appropriate troubleshooting steps.
Resetting the Boiler
Once the problem has been identified, the process of resetting the Aztec electric boiler is straightforward. Follow these steps to reset the boiler:
- Turn Off the Boiler: Locate the time switch or programmer (if fitted) and switch off the boiler. Ensure that the mains supply to the boiler is also turned off.
- Wait for 30 Seconds: Allow the system to reset by waiting for 30 seconds before proceeding to the next step.
- Press the Reset Button: Locate the red button in the center of the thermostat and press it firmly to reset the boiler.
- Turn On the Boiler: Switch the boiler back on at the time switch or programmer (if fitted) and ensure that the mains supply to the boiler is also turned on.
- Monitor the Boiler: Observe the boiler’s operation to ensure that it is functioning correctly and that the red LED light has turned off, indicating a successful reset.
Technical Specifications
The Aztec electric boiler is available in a range of power outputs and configurations to suit various heating requirements. Here are the key technical specifications:
| Specification | Values |
|---|---|
| Electrical Input | 2 kW, 6 kW, 9.15 kW, 11 kW, 12 kW |
| Supply Current (amp) | 8.5A, 25A, 39A, 45A, 51A |
| RCD Rating (amp) | 13A, 32A, 40A, 50A, 63A |
| Minimum Cable Size (mm) | 1, 4, 6, 10, 16 |
| Weight (kg) | 7.0, 8.1, 10.6, 10.8, 10.8 |
| Water Content (litres) | 1.0, 2.1, 3.2, 3.2, 3.2 |
| Dimensions (mm) | Width – 164, Depth – 130, Height – 550, 823, 1073, 1073, 1073 |
| Mains Supply | 230V, 50Hz |
| Maximum Operating Pressure | 3 bar, 43.5 psi |
| Test Pressure | 6 bar, 87 psi |
| Boiler Flow Temperature | Adjustable between 50°C and 80°C |
| Limit Thermostat | Factory set at 100°C |
| Casing Finish | Stove enamelled white |
| Thermal Insulation | Insulated with mineral fibre |
Important Safety Considerations
When working with the Aztec electric boiler, it is crucial to adhere to the following safety guidelines:
- Ensure that the person installing, servicing, or carrying out any remedial work has the appropriate engineering qualifications.
- The installation must comply with the current issue of the IEE Wiring Regulations for electrical installations.
- Do not switch on the boiler if there is a possibility that the water heat exchanger is frozen.
- Ensure that the system is full of water and that any valves fitted to the system are open before firing the boiler.
- Do not cover or box in the boiler; allow air to circulate freely around the appliance.
By following these steps and adhering to the technical specifications and safety guidelines, you can ensure the reliable and efficient operation of your Aztec electric boiler, with the reset button serving as a crucial tool in resolving any issues that may arise.