Table of Contents
What Is A Forced Air Furnace And How Does It Work?
Force air furnaces are the go-to for North America. Fuel sources like gas or oil heat air that is then pushed through ducts by a blower motor to warm homes. The cost of a new installation can range from two and a half thousand to over seven thousand dollars.
- Gas furnaces can reach up to 98% efficiency.
- Electric furnaces are cheaper upfront but cost more energy bills.
- High-efficiency furnaces are great for cold climates but should be weighed against other factors.
Maintenance is key to keeping a furnace running and saving money. Filters and ducts should be checked to make sure oxygenated air is getting back into the home. Professionals are great for regular checks and major repairs.
One of my friends had an inefficient, old propane furnace that needed repairs often. Many contractors failed to fix it before a neighbor suggested one contractor who replaced it with a new gas one. His monthly energy bill has since gone down by almost half!
When replacing a forced air furnace, consider your home size, type, brand, and installation costs.
Factors Affecting The Cost Of A Forced Air Furnace.
To determine the cost of a forced air furnace, you will need to consider several factors. With so many brands and models on the market, options seem limitless.
To get a better understanding of what you’ll be spending, let’s examine some sub-sections: the type of furnace, fuel source, efficiency rating, size of the furnace, installation costs, maintenance, and any additional features.
These factors all play a role in the overall cost of a furnace, so it’s important to keep them in mind as you research and consider different options.
Type of Furnace.
Forced air furnaces come in different types. Each type has a different cost. The type of furnace you choose will affect the total cost of installation and maintenance.
Here is a table of common furnace types and their average costs:
| Type of Furnace | Average Cost |
| Single-Stage Gas Furnace | $2,500 – $6,000 |
| Two-Stage Gas Furnace | $3,200 – $6,500 |
| Modulating Gas Furnace | $4,500 – $8,000 |
| Electric Furnace | $1,500 – $3,000 |
Remember these are only estimates. Costs can vary depending on the brand, size, efficiency rating, and location. Other factors that affect cost include sizing requirements, additional features or upgrades, and labor costs for installation.
To keep costs low, opt for a furnace with a high-efficiency rating. This may cost more upfront but will reduce energy bills. Also, maintain and tune up your furnace regularly to prevent breakdowns and extend its lifespan.
In conclusion, know the factors that affect forced air furnace costs. Evaluate the different types of furnaces and take preventative maintenance measures.
Doing so will save money in the long run. Plus, gas prices won’t be a problem like with your ex!
Fuel Source.
The table above shows the installation and operational costs for different fuel types.
- These costs depend on factors like local market rates and energy efficiency levels.
- Each fuel has its advantages and drawbacks.
- Natural gas is widely available but needs a connection to an existing gas line.
- Electric heating doesn’t produce carbon emissions but might be costly.
In the past, people used wood and charcoal as fuel. Wood fires were difficult to control, whereas coal fires lasted longer.
Nowadays, an inefficient furnace will cost you more in the long run; just like a student who skipped too many classes.
Efficiency Rating.
A furnace efficiency rating is key when it comes to buying and operating a heating system.
- The higher the rating, the more efficient the furnace, resulting in less spent on energy bills.
- The minimum efficiency rating required by law is 78%, and the standard is 80-83%.
- High efficiency is 90-98.5% and comes with extra savings, comfort, and less noise.
Interesting fact: Furnace efficiency ratings began during WWII when fuel was scarce and governments regulated fuel consumption. When selecting a new furnace, consider its lifetime in your home and how much it will be used.
And if size does matter, then your furnace must be compensating for something!
Size of Furnace.
When it comes to furnaces, size matters!
Larger units have greater heating capacity, but this also means higher installation and maintenance costs. Investing in the right-sized furnace for your home is key to saving money.
Professionals can perform load calculations to determine the best size for your abode. Simply buying a large furnace doesn’t guarantee comfort or efficiency. It could end up cycling on and off too much and distributing heat unevenly.
Consulting with experts is essential to get optimal functionality and efficiency from your investment. It also promotes better energy usage and increases safety measures.
Installing a furnace may cost a lot upfront, but you’ll enjoy its warmth for a long time.
Installation Costs.
Installing a forced air furnace can cost a lot, depending on many factors.
- The size and complexity of your home’s duct system are one of the biggest ones. A big home with multiple rooms needs more ductwork, which costs more.
- The type of furnace you choose also affects installation costs. An expensive one may seem pricey upfront, but it could save you money in the long run.
- Hiring a professional to install your furnace is important for it to be done right.
- Unexpected issues during installation can raise costs too. For example: Updating your electrical system or needing extra venting for proper ventilation.
A homeowner shared their experience of choosing a cheaper contractor without researching first. This led to expensive repairs since the contractor didn’t do the job properly.
Doing research and investing in a quality installation team pays off in the end, with energy savings and fewer maintenance costs.
Maintenance.
Regular maintenance is key for optimal performance.
- Get an HVAC technician to inspect and service your furnace yearly. Keep it clean!
- Replace the filter regularly, and inspect the ductwork often.
- Look out for dust and debris. If you see mold, treat it immediately. Keep the combustion area clean, too, as debris can cause pollutants.
- Moreover, regular maintenance eliminates the need for emergency repairs, which are typically expensive.
Pro tip: Maintenance saves money in the long run.
An unmaintained furnace consumes 25-30% more energy than a maintained one, raising monthly bills and degrading the system faster.
Additional Features.
Adding features to a forced air furnace can increase the cost.
Here are four to consider:
- Programmable thermostats. Set preferred temperatures and save energy.
- Air purifiers. Improve air quality by removing allergens and pollutants.
- Variable speed motors. Adjust speed according to thermostat settings. Better efficiency and quieter operation.
- Zoned heating. Control temperature levels in different areas or rooms.
Upfront costs may be higher with extra features, but they can lead to long-term savings and comfort.
Consult an HVAC professional for guidance. Don’t miss out on the benefits of extra features.
Top Brands Of Forced Air Furnaces And Their Average Cost.
To find the right forced air furnace for your home, you need to know the top brands and their average costs. You can compare and choose the best brand based on your budget and needs.
In this section on the Top Brands of Forced Air Furnaces and their Average Cost, we will explore the following sub-sections with their brief introductions: American Standard, Carrier, Bryant, Rheem, Payne, Lennox, and Trane.
American Standard.
Planning to get an American Standard forced air furnace? Consider your home size and budget.
- Prices vary from $2,500-$5,000.
- Models include Silver Series, Gold Series, and Platinum Series.
- Unique feature: AccuComfort tech. Adjusts airflow to fit your needs. Plus, a 10-year parts breakdown warranty.
Before you buy, make sure a professional technician properly sizes and installs it. Regular maintenance is key for optimal performance and long life.
Carrier: Get a furnace that can lift an aircraft carrier!
Carrier.
Bryant’s forced air furnaces provide affordable warmth for your home.
- Starting at around $1,500, Carrier Comfort series models are simple but effective.
- They come with features such as sealed combustion systems and energy-saving blower motors.
- For more efficiency, check out Carrier Infinity Series models. They have variable-speed blowers and modulating gas valves but start at around $4,000.
- Greenspeed Intelligence is Carrier’s special system. It adjusts the furnace output based on real-time temperature data. That boosts performance and saves energy.
For max benefits, get regular maintenance checks. Certified technicians will keep your system running smoothly and efficiently. You’ll save money in the long run by avoiding repairs or replacements.
Carrier offers dependable heating solutions with durability and innovation.
Bryant.
Bryant furnaces stand out from competing brands, thanks to their Variable Speed Blower control.
- This tech gives precise control over air movement, for more even temperatures & lower energy use.
- Plus, Perfect Heat tech adjusts heating based on outdoor temps.
- These furnaces are also built to last; quality construction materials mean they can last up to 20 years with proper maintenance.
The long history of Bryant started in Cleveland with gas-fired boilers. Since then, they’ve bought other brands like Carrier, Payne & Day & Night.
They keep innovating, to provide homeowners with comfort and efficiency solutions.
Rheem.
Rheem’s forced air furnaces come in different sizes and efficiencies to suit customers’ needs.
- Choose from single-stage or two-stage versions with multi-speed blowers.
- And, warranties vary from 20 years to lifetime, depending on the model.
- What sets Rheem apart? Their eco-friendly heating solutions!
- Energy Star-certified furnaces use less energy and reduce carbon footprint. Plus, performance stays optimal.
A friend shared his six-year experience with Rheem; no issues! He speaks highly of the furnace’s durability and efficiency, saying it heats up fast without much fuel.
Tired of furnace woes? Try Payne’s forced air models for top-notch performance.
Payne.
Payne stands out from other brands for its innovation and top-tier quality.
- They use cutting-edge tech and high-grade materials to guarantee their products are robust, energy-efficient, and user-friendly.
- Plus, Payne offers tremendous customer service, including installation, upkeep, and repairs.
- What’s more, Payne has extra features like modulating gas valve controls, variable speed ECM motor tech, and multi-stage operation. This allows users to modify their energy consumption as needed.
If you’re looking for a dependable brand with advanced tech at an affordable price range starting at $1500; with no compromise on quality or customer care, Payne is your go-to for Forced Air Furnaces.
Get the best warranty service and save money on energy bills. Upgrade with Payne now!
Lennox.
Lennox offers gas furnaces with smart Thermostat controls, to ensure comfort and energy efficiency no matter the outdoor weather.
They prioritize customer service and sustainability with eco-friendly products that maximize fuel economy and reduce carbon footprints.
Founded by Dave Lennox in 1895, Lennox is a trusted, reliable brand with 125 years of experience.
With their expertise in HVAC and dedication to customer satisfaction, Lennox Furnaces remain one of the most preferred brands today.
Trane.
Trane’s forced air furnaces come in all sizes and designs.
- They are perfect for small homes and large commercial buildings.
- Plus, these furnaces have variable-speed blowers and smart thermostats to maximize energy efficiency.
- One unique feature is Comfort-R technology. It helps with humidity control and makes heating more even throughout the home.
- Plus, it helps keep the home comfortable without wasting energy.
Trane began in 1885 in La Crosse, Wisconsin. James Trane developed the first steam heating system for a local hospital. Now, Trane is a leader in HVAC equipment and solutions.
Finding the right forced air furnace is like finding a needle in a haystack. Except, the haystack is your home and the needle is your wallet!
Choosing The Right Forced Air Furnace For Your Home.
To choose the right forced air furnace for your home with brands like Carrier, Bryant, Rheem, and others in the market, you need to consider several factors. The required BTU, square footage of your home, climate, and weather in your area, ductwork, and air filters, and the quality of the furnace play significant roles. You should also factor in energy costs and efficiency, warranties, and maintenance.
Calculating Required BTU.
Want to get the right forced-air furnace for your home? Calculating the required BTU is key. This’ll help you find an efficient furnace that can heat your house well.
First, you need to take into account factors like the size of your house, ceiling height, climate, number and size of windows, and insulation levels.
To make it easier, we have this table with the relevant factors and their values:
| Factors | Values |
| Square footage of the house | 1000 sq. ft |
| Ceiling height | 8 feet |
| Climate zone | Zone 4 – subarctic |
| Number and size of windows | 10 windows (2 ft x 4 ft) |
| Insulation level | R-30 |
Once you’ve collected these values, use an online BTU calculator or talk to an HVAC pro to get the exact BTU needed based on the factors.
Keep in mind that other elements like old or damaged doors or windows may also affect BTU requirements and should be taken care of before you choose a furnace.
Pro Tip: It’s always better to overestimate than underestimate the required BTU when picking a furnace.
So, why not make your small house cozy with a furnace?
Square Footage of Your Home.
Size matters when choosing the right forced air furnace for your home.
To make it easier, we’ve made a table with sizing recommendations for typical homes. It’s based on square footage and climate zone.
| Climate Zone | Square Footage of Home | BTUs Required |
| 1 | 600 to 1,000 | 25,000 to 40,000 |
| 2 | 800 to 1,200 | 35,000 to 50,000 |
| 3 | 1,000 to 1,400 | 45,000 to 60,000 |
| 4 | 1,200 to 1,800 | 55,000 to 70,000 |
| 5 | 1,400 to 2,000 | 65,000 to 80,000 |
Size isn’t the only factor. Insulation, windows, and ceiling height are also important. Ask a pro for the right size and efficiency according to your unique situation.
Don’t suffer in an uncomfortable home or pay too much for energy. Pick the best furnace for you and stay warm all winter.
And don’t forget the weather app; just in case you make a wrong clothing choice!
Climate and Weather in Your Area.
When selecting the perfect forced air furnace for your home, it is essential to consider the unique climate and weather of your area. Depending on where you live, the size and efficiency of your furnace will differ.
- In colder regions, a larger furnace with higher efficiency is required to keep your home warm and cozy during those cold winter months.
- Alternatively, in milder climates, a smaller furnace with lower efficiency could do the job.
It is also important to take into consideration any extreme weather fluctuations that may occur.
If temperatures dip or fluctuate often, a high-end furnace with advanced features and smart controls will help regulate temperatures better, providing more comfort for you and your family.
Do not overlook the effect of humidity on indoor comfort, particularly if you live in a hot and humid climate. A furnace with humidity control capabilities can make summer months more bearable, by managing temperature and humidity levels.
Remember, dirty ductwork and a dirty mind are both unpleasant; make sure to clean both for optimal airflow.
Ductwork and Air Filters.
Look after your furnace’s ductwork and air filters for peak performance.
Here are tips:
- Get professional ductwork cleaning every 3-5 years.
- Check air filters each month and replace them when needed.
- Choose good-quality filters for better filtration.
- Invest in a programmable thermostat to save energy and prolong filter life.
- Make sure all vents and registers are clear of furniture.
It’s equally important to seal any leaks or gaps in the ductwork, as these can cause energy loss and bad air quality. Plus, pick an air filter with the right MERV rating for your family’s needs to reduce allergens and pollutants.
Don’t make the mistake of my friend who didn’t care for their furnace. They had a dirty, clogged air filter that hindered their heating system’s efficiency for months. Keep your furnace in good shape and you’ll be rewarded with optimal warmth, cost savings, and great air quality.
A top-notch furnace will never let you down in the cold.
Quality of the Furnace.
A forced air furnace is a must-have for any home, supplying heat during cold months. To decide which one to buy, quality is essential. The quality determines the furnace’s sturdiness and efficiency, which affects how much you’ll need to spend.
To evaluate the quality of a forced air furnace, several aspects must be taken into account. These include:
- Material: The type and grade of material used to build the furnace affect its durability and life.
- Efficiency: The higher the energy efficiency, the less it will cost you to run it over time.
- Warranty: A full warranty gives peace of mind to homeowners if something malfunctions or needs repair.
- Noise level: Noisy furnaces can be troublesome; quiet furnaces bring peace to the home.
Moreover, a high-quality forced air furnace should also offer an excellent user experience, making it easy to use.
To better understand these features, check out Table 1.
| Attribute | Importance | Acceptable range |
| Material | Very high | Stainless steelHigh-grade Aluminum |
| Efficiency | High | Over 94% Annual Fuel Efficiency (AFUE) |
| Warranty | High | Minimum duration – 10 years |
| Noise level | Medium | Below 60 dB(A) |
Forced air furnaces vary from one manufacturer to another based on these features. Material composition and efficiency rating should stay within acceptable ranges, and warranties should be long-term. Also, these heat sources should blend well with their surroundings, as they are in frequent use by homeowners.
If you’re looking at buying a forced-air furnace, you’re taking a major step for your family’s comfort during winter. Make sure to research thoroughly the qualities of the brand and furnace models to get the right one.
Good Luck! Save money on energy bills and invest in a good furnace; the only thing worse than a cold house is paying too much to heat it.
Energy Costs and Efficiency.
Achieving energy efficiency is key to a healthy environment and cutting costs. Choosing the correct forced air furnace for your home? You need to consider various factors.
Let’s look at a table. It shows standard furnaces, their energy ratings, and fuel usage for 2,500 sq. ft of living space.
| Furnace Type | Energy Efficiency Rating | Approx. Annual Fuel Usage |
| Single-Stage | 80% | 1,200 gallons |
| Two-Stage | 90% | 900 gallons |
| Modulating | 95% | 750 gallons |
From the table, you can see that picking an energy-efficient furnace reduces annual fuel usage. Keep in mind that these high-efficiency models may cost more initially.
In addition to energy ratings and fuel usage, other important factors to consider when selecting a furnace are warranty coverage, installation cost, and furnace size.
In old industrial times or building designs, a forced-air furnace could pollute the environment. But, with technological advancements, manufacturers started producing furnaces with lower emissions, improving air quality.
Ah, if only my ex had a warranty and maintenance plan like this furnace, my wallet wouldn’t be so empty.
Warranties and Maintenance.
Having the right warranty and maintenance plan is essential when selecting a forced air furnace for your home. A strong warranty means you can have faith that any unexpected problems won’t break the bank. Additionally, proper maintenance ensures your furnace will run optimally and last longer.
Check out the table below to understand the importance of warranties and maintenance plans when picking a forced air furnace:
| Furnace Brand | Warranty Length | Maintenance Plan |
| Carrier | 10 years | Optional Protection Plans are available. |
| Trane | 20 years (for heat exchangers) | Annual maintenance packages are offered. |
| Lennox | Lifetime limited warranty for certain parts | Maintenance agreements are available. |
From the table above, you can see different brands offer different warranty lengths and maintenance options. By comparing them, you can make an informed decision.
Although warranties cover manufacturing faults, damages caused by improper use or lack of maintenance can void them. To keep your furnace in the best shape, regular inspections by a qualified professional are essential. It’s recommended to schedule annual tune-ups before winter starts to avoid expensive repairs later.
Finding the right HVAC contractor is like looking for a working furnace in a haystack.
Hiring An HVAC Contractor For Furnace Installation And Replacement.
To hire an HVAC contractor for furnace installation and replacement, you need to research and compare contractors to find reputable professionals who offer quality work. It’s important to get multiple quotes from different contractors to compare prices and options. Check for insurance and licenses to avoid any legal problems in the future. Discuss project schedules and payment methods with the contractor. Don’t compromise quality for low prices and prioritize your needs when choosing the right contractor.
Research and Compare Contractors.
When it comes to furnace installation or replacement, it’s key to find a qualified HVAC contractor.
Here are a few tips to assist you in researching and comparing contractors before making your choice:
- Check if they hold the correct licenses, insurances, certifications, and warranties, have online reviews, received awards/honors, etc.
- Ask friends and family for recommendations or browse through local professional organizations such as the Air Conditioning Contractors of America (ACCA) or the Plumbing-Heating-Cooling Contractors Association (PHCC).
- Researching contractors may take some time, but it’s essential to make sure you’re getting the highest quality and value for your money.
- There are numerous contractors to pick from, so review each aspect carefully and make a wise decision.
A study found that almost half of the HVAC installations had workmanship issues. Poor installations can lead to lowered efficiency, higher costs, safety issues, or even structural damage in severe cases. Therefore, always choose reliable and experienced contractors for furnace installation or replacement.
Getting multiple quotes for your HVAC project is like Tinder: you need options but don’t want to waste time with any HVAC contractors who only want to empty your wallet quickly.
Get Multiple Quotes.
Seeking multiple quotes for furnace installation or replacement is key when it comes to finding the best HVAC contractor.
Here’s why:
- You can compare rates and services.
- It gives you an idea of what the average cost should be.
- Evaluate the contractor’s professionalism, responsiveness, and willingness to work with you.
- You’ll have more choices and be more likely to find the right contractor.
Ask for detailed quotes, comprising of product brands, model numbers, warranty details, labor costs, and timeline estimates. This will help you decide based on both cost and quality.
Don’t miss out! Get multiple quotes to get the best HVAC contractor for your furnace needs. This will provide peace of mind and ensure reliable service at a reasonable price. Contact trustworthy contractors in your area now!
Also, make sure your HVAC contractor has insurance. Or you may end up needing a furnace installation AND a lawyer.
Check for Insurance and Licenses.
When employing an HVAC contractor for furnace installment or replacement, it is essential to guarantee they possess the required insurance and licenses. Without these, potential legal matters, damages to your property, and liability can be caused.
- Verify their licenses: See that the contractor holds the correct licensing for your state. This will decide their qualification and experience in the field.
- Inspect their insurance policies: Check their policies closely to prevent any future litigations. Ensure they possess general liability insurance and worker’s compensation coverage.
- Look for affiliations: Seek out contractors who are connected with recognized associations like ACCA and NATE. These affiliations mean that the contractors are up-to-date with industry standards and knowledge.
- Research reviews: Go through reviews from past customers and reviews on local associations’ websites. You can also check ratings with authorities like the Better Business Bureau (BBB) for more visibility to conduct a thorough quality and credibility check.
- Request documents: Before signing a contract, request relevant certification proof, and license proof along with proper indemnity from the HR department for better security.
- Be clear about your needs: Clearly explain what you need before settling on anything with the contractor. An experienced contractor will know how to manage both commercial and residential properties differently based on zoning regulations to enhance the final output.
Besides these tips, don’t be afraid to ask particular questions or doubt clarification from your licensed contractor regarding their certifications and documentation. This will give you direction on making better decisions by choosing the right HVAC contractor who is dependable, and honest while delivering quality workmanship that meets industry standards.
Money matters, but a schedule that works? That’s the real currency when hiring an HVAC contractor.
Discuss Project Schedule and Payment.
Discussing project schedules and payments with an HVAC Contractor for furnace installation or replacement is essential.
Consider the following:
- Project Schedule: Decide timelines based on availability and urgency.
- Payment Structure: Agree on payment terms, e.g. down payment or installments.
- Scope of Work: Define the scope to avoid surprises.
- Change Requests: Set guidelines for changes and charges.
First, find a reliable contractor. Get quotes from 3 contractors to compare project schedules, costs, and payments. Ask questions about options if the project is delayed, budget changes, or unexpected repairs during the process.
Set realistic expectations and communicate openly with your Contractor. This will ensure a smooth project, within budget and timelines.
Don’t choose the cheapest; it’s like buying a disposable camera for your wedding day!
Don’t Compromise Quality for Low Prices.
Never compromise quality for cost when it comes to furnaces. Low rates may seem tempting, but a lack of expertise and experience can cost you more in the long run. Choose a contractor who charges reasonable rates and provides top-notch service.
Do your research and read reviews before hiring an HVAC contractor. Make sure they have experience with different types of furnaces and systems. Unskilled technicians could cause issues later.
Always ask questions and get clarification on pricing and services. A reputable contractor will provide clear information.
Look beyond the price. The right contractor will have experience, expertise and offer great value for money. Choose wisely!
Frequently Asked Questions.
Q: How much does a forced air furnace cost?
A: The cost of a forced air furnace can vary depending on various factors such as the size, brand, energy efficiency rating, and installation requirements. On average, a basic forced air furnace can range from $2,500 to $5,000. However, more advanced and high-efficiency models can cost between $5,000 and $10,000 or more.
Q: What factors can influence the price of a forced air furnace?
A: Several factors can affect the price of a forced air furnace. These include the size of the unit needed to heat the desired space, the energy efficiency rating (AFUE) of the furnace, the brand and model chosen, additional features or technology included, and the complexity of the installation. Additionally, regional variations in labor costs and market conditions can impact the overall price.
Q: Are there any ongoing costs associated with a forced air furnace?
A: Yes, there are ongoing costs associated with a forced air furnace. These typically include regular maintenance and servicing, which may involve filter replacements, inspection, and cleaning. Additionally, the cost of fuel or electricity required to operate the furnace will contribute to the ongoing expenses.
Q: Can I save money with a high-efficiency forced air furnace?
A: Yes, opting for a high-efficiency forced air furnace can lead to long-term cost savings. Higher efficiency units, usually identified by their Annual Fuel Utilization Efficiency (AFUE) rating, can convert a larger proportion of fuel or electricity into heat, resulting in reduced energy consumption and lower utility bills. While high-efficiency furnaces may have a higher upfront cost, the potential savings over their lifespan can outweigh the initial investment.
Q: Are there any government incentives or rebates available for purchasing a forced air furnace?
A: Depending on your location and local regulations, there may be government incentives or rebates available for purchasing a forced air furnace. These incentives aim to promote energy efficiency and may include tax credits, rebates, or subsidies. It is advisable to check with local utility companies, government agencies, or HVAC professionals to determine if there are any applicable programs in your area.
Q: Should I hire a professional for the installation of a forced air furnace?
A: Yes, it is highly recommended to hire a professional HVAC (Heating, Ventilation, and Air Conditioning) contractor for the installation of a forced air furnace. Proper installation is crucial for the safe and efficient operation of the unit. HVAC professionals have the necessary expertise and experience to correctly size and install the furnace, ensuring optimal performance and adherence to building codes and safety standards.
Conclusion:
Buying a forced air furnace is a huge investment. Here are some essential factors to consider:
| Factor | Description |
| Size of Furnace | The furnace must fit your home’s square footage for the best performance and energy efficiency. |
| Type of Furnace | Choose the right furnace type that suits your fuel source. Natural gas, propane, or oil? Electric furnaces are also an option if you don’t want to install gas lines. |
| Brands Mileage | Choose quality-branded models with good warranties. It might cost more upfront, but it’ll save money in future maintenance and repairs. |
Get a professional contractor for installation. Improper installation can result in problems like the system working too much and increasing monthly energy bills. And don’t forget regular maintenance. Don’t ignore these important considerations when buying a new furnace. Procrastination will only result in repair costs and full replacement earlier than expected. Act now!