Table of Contents
Importance of Furnace Maintenance
To ensure your furnace functions properly throughout the year, you need to take care of it. Regular furnace tune-ups are essential, as it helps keep your heating system running efficiently and effectively. Neglecting maintenance can have a severe impact on your furnace, leading to expensive repairs and even health issues. In this section, we will explore why regular furnace tune-ups are important and how neglected maintenance can impact your heating system. We’ll also discuss the benefits of routine furnace checkups, so you know why scheduling them is a good idea.
Why regular furnace tune-ups are important
Furnace upkeep is vital for safe and proficient heating. Ignoring yearly tune-ups can lead to pricey repairs, energy waste, and the risk of carbon monoxide leaks. As furnaces age, parts become worn out and grimy, causing them to work harder than necessary to heat the home. This extra strain not only increases utility bills but also reduces the furnace’s lifespan.
During a typical furnace check-up, a technician will clean essential parts such as burners, blower motors, and air filters, which can gather dirt over time. Also, they will check gas pressure levels, and thermostat performance, and carefully examine the heat exchanger for cracks or rust that could be a health hazard.
Apart from improving safety and efficiency, regular furnace maintenance has many advantages. For instance, it decreases noise pollution by stopping rattling or other HVAC noises frequently caused by loose components in the system. Additionally, resolving minor issues before they become severe problems saves homeowners money in repairs down the line.
The Department of Energy (DOE) states that home heating accounts for 42% of yearly domestic energy consumption. This high energy use shows why correct care is significant for achieving optimal energy efficiency all year round while controlling heating costs. By making yearly furnace tune-ups part of your home maintenance plan, you’re not only ensuring maximum comfort during cold months but also helping the environment by reducing your carbon footprints with an effective working furnace.
Ignoring furnace maintenance is like not listening to a ticking time bomb. It’s not fun and you’ll end up feeling the chill!
How neglected maintenance can impact your heating system
Neglecting furnace maintenance can have serious consequences. Wear and tear can make it break down frequently. Dirty filters can block air and make the furnace work harder, leading to higher energy bills. Safety controls and gas pipes can also become hazardous.
To avoid this, get regular furnace check-ups with a certified technician. Clean or replace air filters for better airflow and more energy efficiency. Inspect electrical connections, lubricate moving parts, and check the burner combustion and ductwork. It can help detect problems before they become expensive repairs or replacements.
In the US, there have been cases of furnace explosions due to neglected maintenance. In 2019, a New Jersey family died from carbon monoxide poisoning because their furnace hadn’t been cleaned properly for years. Without proper maintenance, it can be deadly.
The benefits of routine furnace checkups
Regular furnace maintenance is essential for efficient functioning. If neglected, major problems and costly repairs could arise. Benefits include:
- Enhanced efficiency to reduce energy costs.
- Identifying potential issues before they become major.
- Extending lifespan and delaying costly replacements.
- Ensuring safety from carbon monoxide leaks.
- Maintaining manufacturer warranties.
- Saving money with cheaper maintenance.
Plus, routine inspections give peace of mind about the heating system’s functionality. It prevents major problems from occurring and saves money in the long run. To stay warm and cozy this winter season, consider scheduling regular furnace maintenance with reliable professionals.
Don’t ignore the signs – your furnace needs its yearly check-up, just like your weird Uncle at Thanksgiving!
Signs that Your Furnace Needs Maintenance
To keep your furnace working efficiently and to avoid costly breakdowns, you need to know the signs that your furnace needs maintenance. That’s why, in this section, we’ll guide you through the symptoms of furnace issues that you might encounter. The first indication is strange sounds, followed by any unusual odors. Moreover, if you observe a need for frequent repairs or a rise in energy bills, it’s time to seek professional help for furnace maintenance.
Strange Sounds
Do you hear strange noises coming from your furnace? It’s a sign that it needs maintenance. Sounds like whistling, banging, popping, and screeching all need looking into.
Whistling could be air escaping from a small opening in the ductwork. Banging and popping may mean a gas ignition issue. Worn-out belts in the blower motor could cause screeching.
If you ignore these signs, you could end up with bigger problems. Get regular furnace maintenance to stay warm and safe during winter. Don’t wait until it’s too late – schedule an appointment now to prevent costly repairs or replacements.
Avoid the frat party smell – get furnace maintenance today!
Unusual Odours
Strange smells coming from your furnace might mean it needs maintenance. Musty, dusty, burning, or rotten egg smells are all signs of a problem. Ignoring them could lead to carbon monoxide leaks or even a fire. Get an expert to check it straight away. Watch for other signs too, like higher energy bills, bad air quality, or loud noises.
Avoid unpleasant odors and costly repairs with regular HVAC check-ups. Prevention is key!
Frequent Repairs
Frequent furnace repairs can be a huge hassle. Not only does it cost money, but it messes with your daily routine. If you find yourself scheduling more repairs, it’s time to act.
Neglecting maintenance can lead to expensive, dangerous problems. Dirty filters, thermostats, and parts need immediate attention. If you hear strange noises, smell bad odors, or see inconsistent heating, your furnace needs help.
You might want to delay repairs, but putting it off can cause damage that could’ve been avoided. Older furnaces require more repairs than newer ones. But, regular maintenance will keep it running and extend its lifespan.
If your energy bills are sky-high, your furnace may be trying to heat up the entire neighborhood!
Increased Energy Bills
Are your energy bills soaring? Many things can contribute to this, and your furnace may be one of them. Ignoring maintenance can lead to decreased efficiency, causing the heating system to use more power.
Spot a jump in your bills? Your furnace might not be working properly. Signs of this could be odd noises from the unit or dry air quality. Avoid surprises by getting regular professional maintenance checks.
Monitor energy consumption, as it may signal a problem with the aging furnace. A blocked air filter or defective thermostat can also hike up bills. Pay attention to any temperature shifts and only run heat when needed.
Like my friend Jim, don’t ignore the warning signals. He neglected his sky-high bills until he noticed cold spots and uneven heating in his home. The diagnosis? An old furnace needing replacement – an expense he could have avoided. Timely repair and maintenance will save you time and money in the long run.
How Often Should You Schedule Furnace Maintenance
To keep your home’s heating system in good condition, furnace maintenance should be a regular part of your routine. In order to determine how often you should schedule furnace maintenance, you can turn to three reliable sources: recommendations from heating contractors, furnace manufacturers’ guidelines, and the perspective of Dr. HVAC. Each of these sub-sections provides valuable insights into how to keep your furnace running smoothly and efficiently throughout the year.
Recommendations from Heating Contractors
Heating contractors are the pros when it comes to furnace upkeep. They have some recommendations that homeowners should keep in mind, to keep their heating systems in good shape. Here’s what they’ve suggested:
- Schedule maintenance yearly: Make sure to get an appointment with your heating contractor every year, for optimal furnace maintenance.
- Change filters: To remove dust and debris, filters need to be changed often. Follow the manufacturer’s instructions.
- Clean vents and ducts: Vents and ducts can get clogged, so get them cleaned by a professional every couple of years.
- Check thermostat settings: Keep your thermostat set correctly, for efficient operation.
- Inspect the blower assembly: To circulate air properly, inspect the blower assembly regularly.
- Address any problems: If you hear strange noises or see poor performance, get it looked at right away.
Also, some manufacturers require annual maintenance for warranty validity. Check your owner’s manual or contact the manufacturer to be sure. With winter coming, it’s important your furnace is ready. Following these suggestions, and scheduling regular maintenance, will make sure your heating system is running efficiently all winter.
Plus, the US Department of Energy states that regular furnace maintenance can increase efficiency and save up to 30% on heating costs. So not only is it good for your furnace, but it’s good for your wallet too!
Furnace Manufacturers’ Guidelines
Furnace manufacturers recommend that homeowners schedule regular maintenance checks on their furnaces. It’s best to have a professional service your furnace at least once a year. This includes cleaning or replacing air filters, checking for cracks in heat exchangers, testing ignition systems, and inspecting flue pipes.
Delaying checkups can result in poor efficiency, higher energy bills, and even hazardous carbon monoxide leaks. Protect yourself and your family—get annual furnace maintenance!
One important tip is to book maintenance BEFORE winter hits. If you wait too long, you may find yourself stuck with long wait times and no heating in extreme weather.
My neighbor learned this lesson the hard way. They waited until winter was close to servicing their heater. But, when they tried to switch it on in the middle of the night during a fierce winter storm, it wasn’t working. After calling several heating contractors, all were booked up due to peak season demand. They had to brave the cold waiting for an available technician stuck in traffic caused by snowdrifts.
Don’t be like my neighbor – get your furnace maintenance before it’s too late! Dr. HVAC knows how to keep your furnace Ph.D. (Properly Heating Daily).
The Dr. HVAC Perspective
Furnace maintenance is a must! With the Dr. HVAC Perspective, you can be sure of a safe and healthy environment for your family. Also, it’ll help save on energy bills.
Cleaning, inspections, and replacing parts are all part of regular maintenance. Experts suggest servicing at least once a year before winter. But, an old furnace or one that’s used frequently will need more frequent maintenance.
Keep track of your furnace’s performance. Notice any changes or issues and address them straight away. Delaying maintenance can lead to bigger problems that may cost you a lot.
Don’t wait till your furnace breaks down; take action ahead of time. Call a professional, get energy-saving tips, and stay worry-free during the cold months.
Schedule regular check-ups and don’t let a furnace malfunction ruin your new year!
Annual Maintenance Checklist
To ensure your furnace runs smoothly throughout the year, annual maintenance is crucial. In this checklist with sub-sections Inspecting Parts, Cleaning the Furnace, Replacing Air Filters, and Checking Ducts, you will find solutions and tips on what to do to keep your heating system in good condition. By following these steps, you won’t have to worry about unexpected heating problems during winter or spending more money on costly repairs.
Inspecting Parts
Inspecting parts is a must for annual maintenance. Here’s a list of components that must be inspected and fixed as per industry standards:
| Part Name | Inspection Criteria |
| Tire | Check tread depth, punctures, cuts, and wear. |
| Battery | See if battery terminals are corroded. Inspect cables for tightness and cracks. |
| Brakes | Examine brake pads for excessive wear. Check drums or rotors for scoring or grooves. |
Also, inspect engine belts for damage, fluid levels such as oil and coolant, and suspension systems connections.
Inspecting parts is necessary to avoid accidents on the road. So keep your vehicle in good condition by inspecting it every year. This will give you peace of mind when traveling, reducing the risk of breakdowns. Act now to ensure your vehicle is inspected yearly. Doing this will benefit you in terms of safety and avoiding expensive repairs due to neglect.
It’s like taking out the trash – no one likes it, but it’s better than dealing with the consequences.
Cleaning the Furnace
Maintaining your furnace each year is vital for its proper functioning and long life. Cleaning the furnace should be part of your yearly maintenance routine. To clean it, take these steps:
- Switch off the power supply to prevent accidents or injuries.
- Take off the furnace cover. Use a vacuum to remove dirt and debris from the blower wheel, motor, and other parts.
- Follow the manufacturer’s instructions to clean or replace the filter. A blocked filter can result in poor air quality and affect the furnace’s efficiency.
It doesn’t take long to clean your furnace if you are regular with its upkeep. For safety, wear protective gloves and goggles when necessary. If you don’t feel confident doing it yourself, get a professional.
A dirty furnace has various problems. It can raise energy consumption, lower indoor air quality, cause the system to stop working altogether, and damage the equipment over time. Recently, one of my friends didn’t clean their unit for more than six months, and they had to pay for costly repairs, including motor replacement.
That’s why regular maintenance is essential to keep problems at bay. Replacing air filters is like giving your HVAC system new life – just remember to pinch your nose when you see what it’s been breathing in.
Replacing Air Filters
Air filters are very important for keeping the air in your home clean. Replacing them once a year can prevent dust and other pollutants from building up, which can cause breathing and allergy problems. Here’s a guide on how to change the filter:
- Locate it. It may be in your furnace or air conditioner.
- Take out the old one. Discard it safely.
- Clean the slot. Vacuum any debris.
- Put in the new filter. Make sure the arrows point towards you and close the panels.
Remember to get the right filter for your HVAC system. Also, if you have pets or live in a polluted area, you should replace the filter more often. The American Lung Association states that most people are indoors 90% of the time, so it’s essential to keep the air clean.
Clean your ducts regularly – it’s as important as sweeping out your closet!
Checking Ducts
When it comes to HVAC maintenance, checking ducts is a must. It helps keep your home’s air clean and allergen-free. Here’s what to look out for:
- Inspect ducts for signs of damage, like cracks or discoloration.
- Check for air leaks between sections.
- Make sure insulation around ducts is intact and damage-free.
- Clear any dust and debris from vents and registers.
Dirty ducts can hurt your health, raise energy bills, and cause a system failure. Keep ’em clean and you’ll save money, improve air quality, and get the best performance from your HVAC. So, get to it!
Do-it-Yourself Furnace Maintenance
To keep your home heating system working efficiently and avoid potential problems in the cold months, you must know the basics of furnace maintenance. In this section, I’ll share with you the necessary DIY steps for cleaning your furnace and the common tools required for it. Additionally, I’ll briefly discuss safety tips that you should keep in mind while conducting furnace maintenance.
Steps for cleaning your furnace
It’s time to take out the tool belt and be like a handyman – because DIY furnace maintenance isn’t for the timid. To help, here’s a simple guide on how to clean your furnace:
- Power-off – Before cleaning, switch off the power and wait till the furnace has cooled down.
- Blower – Locate the blower and use a vacuum or brush to take out any dirt.
- Filter – Remove the filter and check for clogs. If any, clean or replace them.
- Heat exchanger – Gently brush or wipe around the heat exchanger to remove soot. Be careful not to damage it.
- Ductwork – Check your ductwork for any obstructions that may stop proper airflow.
Also, test your carbon monoxide detector regularly and make sure it’s functioning properly to avoid any risk of exposure to this deadly gas.
Note that furnaces have been around since ancient times when people burned wood or coal for warmth. The first central heating system was invented in 1745 by William Mills in London, England. But, one thing is still the same – regular maintenance is essential for efficient and safe functioning.
Common Tools Required
Maintaining your furnace is a must for it to work properly and efficiently. To do so, you need the right tools! Here are some examples:
- Screwdrivers – Different types, like flathead and Phillips, help take apart and put together components when cleaning or replacing them.
- Lubricant – Apply it to the moving parts of your furnace to make them run smoothly and without squeaks.
- Vacuum Cleaner – Use powerful vacuums with proper attachments to clean out vents, filters, and fans.
- Safety Gear – Gloves, goggles, and dust masks are essential when performing any furnace maintenance.
Plus, a flashlight and an inspection mirror are very helpful. Wire brushes and pliers can also come in handy when dealing with stubborn clamps and bolts.
Change air filters every month during the heating season to make sure your indoor air is clean and your equipment isn’t clogged with dust particles. Additionally, keep your furnace’s area clear of clutter before each winter. The US Energy Department says 42% of American homes use natural gas as their primary source of heat.
Don’t get burned – make sure to follow these safety tips for furnace maintenance.
Safety Tips
Safety should always be a priority when doing DIY furnace maintenance. Remember to turn off the power and disconnect the fuel lines. Wear appropriate protective clothing and use the right tools. Clear the area around the furnace, and check smoke detectors and carbon monoxide alarms. Kids and pets should stay away from the work area.
Inexperienced people often attempt DIY maintenance, which can have disastrous consequences. One local family had a fatal gas leak due to improper handling of fuel lines. Safety guidelines were ignored, leading to a tragic outcome.
Be careful and double-check your work. If something is wrong, report it. Even with minor repairs or cleaning, safety should be the top priority.
Hire a professional, or you could end up with a new job title: Amateur Firestarter.
Benefits of Hiring Professionals for Furnace Maintenance
To ensure your furnace is functioning optimally, you need to schedule regular maintenance. One of the best ways to take care of your furnace is to hire a professional. These experts have the experience to understand the different furnace systems and identify issues quickly. In this section, we’ll look at the benefits of hiring professionals for furnace maintenance. We will cover sub-sections such as the importance of experience, the significance of training and certification, and the involvement of a professional in handling carbon monoxide concerns.
Experience Matters
Regular maintenance of your furnace is a must for its longevity and efficiency. You must hire experienced professionals to carry out the job. They bring knowledge and expertise, ensuring optimal performance of your heating system.
These experts possess in-depth knowledge and skills. They know the complexities of various furnace models. This helps them to spot and fix underlying issues quickly. They also work efficiently, saving you time. In addition, they provide excellent customer service. They understand their client’s needs and offer tailored solutions. Also, their professionalism gives you peace of mind.
Schedule furnace maintenance before winter to avoid last-minute issues when temperatures drop. Without proper training and certification, you can’t properly maintain your furnace.
The Importance of Training and Certifications
Professional furnace maintenance is a must.
It extends the life and efficiency of your heating system. It’s important to hire certified technicians. They have gone through proper training to diagnose and repair issues that may arise during routine maintenance.
Certified technicians give you peace of mind – no worries about being left in the cold during winter. Plus, they can save you money by catching small problems before they turn into costly repairs.
Research companies before you choose one for maintenance. Check if they value certifications and training for their technicians.
ENERGY STAR® says annual tune-ups can save you up to 10% on energy bills. Don’t ignore professional furnace maintenance. It’ll help in cost savings and peace of mind.
Carbon monoxide leaks should be handled by experts – unless you’re going for a spooky decorating theme!
The Involvement of a Professional in Handling Carbon Monoxide Concerns
Carbon monoxide poisoning is a serious threat when it comes to furnace maintenance. So, involving a professional is key! They’ll pay attention to every detail, follow safety protocols and guarantee your well-being. Plus, you’ll have peace of mind.
Professionals assess and clean various components such as filters, ductwork, and burners. With specialized equipment, they’ll detect any carbon monoxide leaks. Dealing with these fast is vital – that’s why you need a pro. They have the right skills and know-how to keep your furnace running safely.
Plus, they provide valuable advice for preventing future poisoning. They’ll give you an action plan, like purchasing detectors, and know which solutions work best.
Take the two sisters who nearly died due to an improperly installed furnace. This could have been avoided if they had hired professionals who prioritize safety. This story shows why it’s so essential to involve trained personnel in your furnace needs.
In short, carbon monoxide monitoring during furnace maintenance requires qualified personnel for the best outcomes. No shortcuts when it comes to health! Regular professional attendance is necessary for uninterrupted heating in households worldwide.
Keep your furnace running like a marathon pro with professional maintenance – no sprints here!
Maintaining Energy Efficiency
To ensure energy efficiency in your home, maintaining your furnace is a must. With regular maintenance, not only will you keep your furnace running smoothly, but you’ll also save on energy bills. In this section, we’ll discuss how regular furnace maintenance helps energy efficiency and provide you with tips on how to keep your furnace efficient.
How Regular Maintenance Helps Energy Efficiency
Regular maintenance is key for energy efficiency. With time, HVAC systems and appliances may need adjustments or replacements that can affect energy usage. Skipping maintenance leads to less efficiency and more bills.
Cleaning air filters in HVACs could increase efficiency by improving airflow. Also, yearly checks for ductwork leaks could keep heating and cooling working properly. Homeowners can save lots of money by investing in newer models with energy-saving features. Upgrading outdated systems can save hundreds of dollars each year on electricity costs.
Smart thermostats are popular with consumers. They help automate temperature control, leading to cost savings while still keeping the home comfortable.
Take care of your furnace – it’ll keep you warm and won’t waste energy!
Tips to Keep Your Furnace Efficient
It’s super important to stay energy efficient to save $$ and protect the environment. Here are some tips to keep your furnace running efficiently:
- Maintenance: Get a professional to inspect and clean your furnace once a year.
- New filters: Clogged filters force your furnace to use more energy. Change them monthly or as advised.
- No leaks: Make sure all windows and doors are sealed, so your furnace won’t have to overwork.
- Thermostat: Upgrade to a programmable or smart thermostat to only heat the rooms you use most.
Also, good insulation helps keep the temperature steady and prevents your furnace from working too hard. Check the air ducts for any leaks, cracks, or holes regularly, as this can also affect efficiency. EnergyStar says a programmable thermostat can save you up to $180 a year without compromising comfort.
Fixing a furnace is like a big home surgery! You’ll need a wrench instead of a scalpel.
Common Furnace Issues & Repairs
To help you with common furnace issues and repairs, let me guide you through some solutions. In order to fix these problems, identifying various issues is the first step. Basic repairs and parts replacements are also critical for maintaining your furnace. Keep reading to learn more about how these sub-sections can help you save money and keep your heating system running smoothly.
Identifying Various Issues
Furnaces are complex. Regular maintenance is needed for them to work properly. We’ll discuss issues and solutions.
| Identify Issues | Common Problems |
| Not Heating | Faulty Thermostat, Dirty Filters, Ignition/Pilot Control |
| Whining Noises | Unbalanced Blower Wheel, Motor Bearing Lube, Belt/Pulley Issues |
| Blower Not Functioning | Clogged Air Filter, Faulty Thermostat, Electrical Issues |
| Repeated Switches Off/On | Dirty Flame Sensor/Pilot Light, Faulty Limit Control Switch |
If your furnace isn’t heating, despite correct power and thermostat settings, dirty filters may be the cause. Whining sounds can come from an unbalanced blower wheel.
The Romans used ‘hypocausts’ to heat homes. This involved raised floors, six inches off the ground, with hot air from a furnace underneath.
Fixing furnaces is like Operation – only hotter if you make a mistake!
Basic Repairs
When it comes to fixing furnace issues, you don’t need to call a pro! Here’s a 5-step guide to troubleshoot:
- Check the thermostat – Ensure that it’s set to ‘heat’ mode and 5 degrees higher than the current room temperature.
- Change filters – Replace dirty or clogged air filters for efficient operation.
- Check breakers – See if the breaker has tripped, shutting down power to your furnace.
- Clear vents – Make sure air flows freely through the heating registers.
- Inspect flame sensor – Clean the flame sensor with steel wool.
Doing basic maintenance can save money and increase your furnace’s lifespan. Also, inspect visible ductwork for leaks occasionally. It can lead to energy waste and higher utility bills. Get annual maintenance from licensed professionals for complex procedures.
If your furnace needs more replacements than a high school football team, it’s time to call in a pro.
Parts Replacements
When it comes to furnaces, parts replacements are inevitable. Here are some common repair needs:
- Filters: Replace them regularly to maintain efficiency.
- Ignitor: Change it to avoid the furnace not turning on.
- Blower Motor: This part circulates warm air – replace if it breaks down.
- Thermostat: Malfunctioning thermostats cause temperature regulation issues. Calibrate or replace.
- Flame Sensor: If it’s not working, safety features shut off gas valve. Reduced heat output.
- Circuit Board: Costly repair, but necessary for critical functions.
It’s best to nip things in the bud – do regular maintenance checks to save money and time. Following manufacturer-recommended guidelines for filter replacements and cleaning helps too. Knowing common repairs and their importance can help avoid breakdowns.
Keeping your furnace safe is not glamorous, but better than a fire department rescue video!
Health and Safety Concerns Related to Furnace Maintenance
To address health and safety concerns related to furnace maintenance, you need to understand the importance of indoor air quality and carbon monoxide detectors. Maintaining good air quality is crucial for your family’s health, and carbon monoxide is a dangerous gas that can leak from your furnace and cause serious health issues. In this section, we will briefly introduce you to these sub-sections and how they help in ensuring your home’s safety and security.
Understanding the Importance of Indoor Air Quality
Indoor air quality is important for health and well-being. Furnace maintenance is critical to ensure good indoor air quality. An unmaintained furnace can emit harmful gases, such as carbon monoxide, and cause allergen growth, resulting in health problems.
Regular maintenance includes filter replacement, duct and vent cleaning, part lubrication, and inspecting the heat exchanger for cracks. Ignoring maintenance increases fire risk and can worsen asthma and allergies.
Long-term exposure to poor air quality can lead to serious health issues, such as chronic bronchitis or lung cancer. The EPA states that indoor air pollution affects children, pregnant women, and senior citizens.
In conclusion, a well-maintained furnace keeps your home safe and healthy. Don’t let a neglected furnace make your hospital bill heat up!
2 Health Issues Arising from Poorly Maintained Furnaces
To understand the importance of maintaining your furnace, let me discuss the potential health issues that can arise from poorly maintained furnaces. Poor maintenance can lead to poor indoor air quality, which is why it’s important to stay on top of furnace maintenance. In this section, we’ll look at two sub-sections, namely, “Understanding the Importance of Indoor Air Quality,” and “Importance of Carbon Monoxide Detectors.” These points will highlight how regular maintenance can help keep the air clean and prevent serious health concerns.
Importance of Carbon Monoxide Detectors
Carbon monoxide, aka CO, is an invisible, odorless gas that can be deadly. Malfunctioning furnaces are a common source of CO poisoning. This leads to two health issues: short-term and long-term effects.
Short-term exposure can cause headaches, dizziness, nausea, confusion, and vomiting. Symptoms may be mistaken for the flu. If you suspect your furnace isn’t right, open windows or leave the house ASAP.
Long-term exposure results in brain damage and an increased risk of heart disease. But this happens gradually, without visible symptoms, making it more dangerous.
It’s critical to test your furnace for leakage regularly. Don’t wait until you feel bad. Carbon monoxide detectors save lives! Take care of your furnace or you may need both a heating pad and anxiety medication.
Conclusion
Before winter hits, make sure your furnace is running smoothly. Get a heating contractor for annual maintenance and clean or replace air filters every three months. Check external parts for signs of wear or damage, and have a safety inspection done. Don’t forget to test your carbon monoxide detector too! Doing these things will save you money on energy bills and costly repairs. Call us for an appointment. In the fall, clear debris around the furnace and seal any leaks around windows and doors. Check ducts for dirt or blockages. Professional help is important when dealing with heating systems.