Table of Contents
Image: A furnace blower
Common reasons why furnace blower won’t kick on
To troubleshoot why your furnace blower won’t turn on, we will explore some common reasons which could cause this issue. Electrical power issues, faulty blower motor parts, thermostat issues, airflow issues, and safety devices are some of the sub-sections we’ll discuss in detail to help you identify the root cause of the problem. By following the steps laid out in these sections, you may be able to identify the issue and fix the problem yourself without the need to call in a service technician.
Electrical power issues
Your furnace blower might not turn on due to electrical power issues. Ensure the furnace is receiving power by checking the circuit breaker. It might be faulty wiring or damaged motors.
- Other possible causes are malfunctioning thermostats and poor connections in the system’s switchboard.
- A tripped circuit breaker is a common culprit. It may cause minor inconvenience, but it could also mean more serious problems with wiring or motor malfunctioning.
- Worn-out contactor switches are another issue; they wear out and can become stuck in an off position, leading to blower failure.
Faulty contactor switches can cause intermittent failures. But other electrical power problems pose severe threats such as fire hazards and electrocution risks. Avoid DIY methods when dealing with something so dangerous.
Circuit breakers are essential parts of your furnace. They help protect your system from power surges and overloads. A broken breaker can cause your blower not to work, leading to inadequate heating. Here are some common reasons why your furnace blower won’t turn on:
|Tripped Circuit Breaker||Check if circuit breakers are working properly. Reset if needed.|
|Blown Fuses||Let the fuse cool, then replace it with one with the same specs.|
|Faulty Wiring||Call an electrician to repair or change damaged wiring.|
Even if you take the right steps, a circuit breaker can still trip after resetting. Loose wiring connections could also be the cause. It’s important to get an expert electrician to look at it. Electrical systems need to be treated with caution and skill. Don’t try DIY methods as they could make things worse – get a qualified electrician for all repair work on your blower system.
A blown fuse could be the reason your furnace blower ain’t startin’. You should know:
- Fuses are components of the electrical circuit powering the blower. They stop it from overheating and overloading.
- If the fuse blows, the circuit will shut down, no power for the motor.
- Reasons for it blowing include power surges, wiring snafus, or an overloaded system.
- To check if a blown fuse is the issue, you gotta locate it and look for damage or burn marks.
- If the fuse is kaput, replace it with the same size and rating. Don’t use a higher-rated fuse, or you risk more damage or a fire hazard.
- To prevent future blowouts, get an HVAC expert to inspect your furnace.
Low voltage controls
|Lack of power||Worn-out capacitors||Replacing parts|
|Faulty wiring||Tripped circuit breakers||Resetting the system|
When dealing with low voltage controls, ensure wiring connections are secure and correctly plugged in.Regular maintenance can help prevent breakdowns and prolong the life of your furnace blower. Always consult a licensed HVAC contractor for major repairs or modifications. This will keep risks and costs down. If the motor parts are acting up, that’s the likely issue.
Faulty blower motor parts
Blower motor parts are essential for a functional furnace. These components can become faulty, causing the blower to fail to turn on.
A damaged capacitor can be a cause. This part stores energy for start-up. The wheel cage could be broken, stopping the fan blade from turning. A malfunctioning relay switch can stop the blower from turning on at all.
Dirty or damaged filters can make the motor work harder, leading to damage over time. Before attempting any repairs, take care as electric devices can be unsafe.
If the blower won’t come on, check the fuse box and circuit breaker panel. You could contact HVAC professionals or attempt DIY fixes if you feel confident enough.
Know why and when these tips happen. It’s critical to troubleshoot your system effectively, rather than throwing money away on unnecessary fixes.
When your furnace blower doesn’t kick on, it could be because of a bad capacitor. Capacitors store and release energy, helping the blower motor work. Signs of a bad capacitor include Humming sounds or it won’t turn off. Replacing it is important for the furnace to perform optimally and avoid breakdowns.
Hire a pro to do the replacement. Don’t wait ’til the blower completely stops working. Take action when you see any sign of faulty parts in the furnace system.
Don’t risk cold nights without heat. Schedule maintenance with licensed pros to keep all components efficient and replace any faulty parts right away. Maintaining your furnace means durability, efficiency and cost savings. Act now and enjoy warmth this winter.
Bad control board
When the furnace blower won’t kick on, it could be a bad control board. This board regulates your furnace. Electrical issues can stop it from sending power to the blower motor. This could make your home cold.
The control board problem can also affect other parts of the heating system. Voltage might surge and damage the electrical circuit. This can lead to big repairs, so get professional help if you don’t have experience with electronics. DIY could be dangerous and pricey. Don’t wait – get help and avoid major expenses.
Bad fan limit switch
A faulty fan limit switch can mean your furnace blower won’t start. Let’s look at the causes.
- The switch can be dirty and need cleaning. It may be old and worn out, or damaged due to an electrical surge or other physical damage.
- Apart from these, other problems in the furnace system could be causing the fan limit issue.
It’s worth remembering that regular maintenance of your furnace can avoid such issues. The US Department of Energy states that properly maintaining your heating system will make it more efficient and save money.
Bad blower wheel
The furnace blower wheel is key for distributing hot air throughout the home. If it’s not working right, it can cause discomfort and inefficiency. Common causes of a bad blower wheel can be:
- Bent blades: Replace the damaged fan blade.
- Loose set screw: Tighten or replace the set screw.
- Dirt buildup: Clean the blower wheel with a stiff brush.
- Wear and tear: Replace the blower wheel.
Inspect and maintain your furnace blower regularly to avoid issues. A bad blower wheel restricts airflow, strains the furnace, and causes higher energy bills. It can even lead to equipment failure.
Be proactive in checking for wear and tear. Invest in maintenance to prevent any hazards. Regular inspection and maintenance are essential for keeping your furnace running correctly. Follow these steps and save money on repairs.
When your furnace blower won’t kick on, check your thermostat. It must be working properly to send the right signals to your furnace.
- Replace the battery if it’s digital. It might also be set to the wrong temperature or mode. Make sure it’s set to “auto” and “heat”.
- Check the wiring too. Damaged wires can block signal transmission. If not comfortable, call an HVAC expert.
Remember, thermostats are important for communication between HVAC components. Regular maintenance can prevent issues. If the wiring looks like a rat’s nest, time to call an electrician.
Image: Thermostat of a furnace
Thermostat wiring can be the culprit when your furnace blower isn’t working. So, it’s important to know the wiring and connections. Let’s check out the common causes and solutions. The following table shows the possible causes and solutions to different issues you may face with thermostat wiring:
|No power to the thermostat||Dead batteries or tripped circuit breaker||Replace batteries or reset the circuit breaker.|
|Miswiring||Incorrect wiring connections||Reconnect wiring correctly or call a pro for help.|
|Faulty thermostat||Worn out or damaged thermostat||Replace the thermostat with a new one.|
Check for loose or disconnected wires and label each wire properly. Any mistake in wiring can cause major malfunctions and be dangerous.
Thermostat face settings
The thermostat face settings are very important in HVAC systems. You can set the temperature, mode, and fan speed here. Let’s examine how different thermostat settings affect furnace blower performance.
|Off or Cool||The furnace blower must not turn on.|
|Heat On||The furnace blower should run automatically when the heat is on.|
|Fan On||The furnace blower will turn on by itself, regardless of heating or cooling mode.|
|Auto Fan||The furnace blower will run automatically when ‘Heat On’ or ‘Cool On’, but not when the mode is off.|
Remember to check the “Heat On” and “Auto Fan” settings for your thermostat. If misconfigured, the furnace blower won’t work when you expect it to.
Thermostat fan switch
Frustrating and uncomfortable – your furnace blower not turning on ain’t no fun. Could be the thermostat fan switch that’s the culprit, so here’s what you should know:
- Check if your thermostat is set to “auto” and not “on”. If it’s on, the fan will blow constantly, even without the furnace heating.
- Thermostat fan switch controls when the blower motor turns on and off. If it’s too high, the blower won’t come on until significant heat builds up in the home. Try setting it lower.
- Malfunctioning fan limit control can cause issues with the blower motor too. It monitors air temperature passing furnace heat exchanger and cycles blower on/off accordingly.
Plus, older thermostats may not be compatible with newer HVAC systems, leading to similar issues.
Take the case of one homeowner – their thermostat fan switch was the problem. After checking furnace components and settings, they finally realized their system was outdated. Installing a new one with a compatible thermostat solved the problem!
Airflow is a crucial issue for furnaces. Optimal performance and functionality is only possible with proper air circulation.
- Clogged or dirty air filters can be the cause.
- Clean or replace them regularly. Issues with ductwork or blower motor can also lead to airflow problems.
- Regular maintenance can detect potential problems before they become bigger issues.
Other reasons why the blower may not kick on include faulty limit switches, and electrical issues such as loose wires in the blower circuitry. Watch out for any abnormalities and call in professional help if needed.
Dirty air filter
It’s important to check your air filter regularly and change it every 3 months or as needed. Dirty air filters not only restrict airflow, they also decrease indoor air quality, increase energy consumption, and can harm HVAC components.
- Make sure to buy high-efficiency pleated filters that trap pollutants without blocking airflow.
- If you have pets or allergies, replace the filter every 30-60 days.
- Clean or replace other parts like evaporator coils if the filter appears clean but still restricts airflow.
If you’re not comfortable taking care of technical HVAC issues, contact a licensed professional instead. Refer to your owner’s manual for specific instructions about locating the air filter and choosing the right one for your furnace system.
Dust accumulation in the blower compartment
Dust build-up in the blower compartment can cause major issues for your furnace. It restricts airflow, reduces efficiency, and leads to higher energy costs. Plus, it can damage the motor and fan blades if not cleaned regularly.
To prevent this, clean your blower compartment regularly. Turn off the power and take off the panel cover. Use a soft brush or cloth to remove dust and debris. Consider hiring a professional technician for a more thorough clean.
Replace the furnace filter every 1-3 months, depending on use. A dirty filter invites dust and debris into the blower compartment.
Blocked vents can cause a furnace blower not to work. Particles and debris can clog up the vents, blocking the air flow and causing the blower to switch off. To fix this issue, here are four easy steps:
- Turn off the furnace: For safety, switch off the furnace before doing anything.
- Clean the vents: Vacuum or use a brush to clear any obstructions from the vents. Make sure all of it is clean with nothing left behind.
- Replace filters: Dirty air filters can also lead to blockages, so replace them every few months.
- Check thermostat settings: Ensure that your thermostat is not too low – otherwise your furnace will turn off when it reaches its set temperature.
If even after following these steps, the furnace blower still won’t turn on, contact a professional right away. Cleaning and replacing filters may not totally fix the blocked vent problem. Don’t be afraid of the cost or inconvenience of seeking help, as using a broken system can cause more serious issues like carbon monoxide poisoning or electrical outages. It’s essential to keep your home safe and comfortable by making sure your furnace works correctly.
Damaged squirrel cage
Furnace blower not turning on? That could be because of a damaged squirrel cage, the curved fan-like part that moves air through the system. Here’s what you need to know:
- Check for visible damage – Look at the squirrel cage in your furnace. Is anything bent or cracked? If so, you may need to replace the entire part.
- Listen for strange noises – A damaged squirrel cage can make rattling and grinding sounds. Turn on your furnace and listen closely.
- Call a professional – DIY repairs may not be the best idea. Get a licensed HVAC technician to diagnose and fix the issue.
Aging or lack of maintenance can cause a broken squirrel cage. Keep your furnace clean, lubricated and inspected regularly to prevent this.
Furnace blower won’t start? Might be due to a safety device issue. All homeowners should know about these 3 points about safety devices.
- Limit switch: Regulates furnace temp and turns off burners if it gets too hot.
- Flame sensor: Detects flames and shuts off the gas valve if there’s none.
- Pressure switch: Monitors air pressure changes to make sure the heat exchanger’s airflow is proper.
It is very important to keep safety devices functioning to avoid fire and gas leaks. Filter cleaning and annual system inspection by a certified technician recommended.
If the furnace blower still won’t start, check thermostat settings, circuit breakers, or pilot light. If that doesn’t work, consider upgrading the system or calling an HVAC contractor. Always keep safety first when it comes to heating equipment. Seems like the high limit switch is holding up the furnace blower – it’s not giving it the go-ahead to start.
High limit switch
The high limit switch is a must-have for your furnace blower. It’s a safety feature that helps to avoid overheating and other damages. It’s vital to make sure it’s working and set correctly.
It’s important to check and replace the switch if necessary. There have been fires due to faulty furnaces, which could have been avoided with proper maintenance of the high limit switch.
Image: The limit switch of a furnace
So, ensure your furnace is in top condition and your switch is always working well for peace of mind. The high limit switch is like the drama queen of the furnace world.
The pressure switch is essential to a furnace blower for safety. It makes sure the system doesn’t work until the correct pressure is detected.
- Blower isn’t turning on is an indicator that could mean the switch is faulty or stuck. Cleaning or replacing parts could be a solution.
- Clogged air filters or blocked vent pipes can also cause the switch to fail. To avoid this, do regular maintenance.
- Strange noises, smells, on/off cycling – if you notice any of these, call in a technician.
They will tell you what to do and what not to do. Don’t try to fix electrical components without proper training – it’s dangerous!
Flame sensors are key for the safe functioning of your furnace. Without them, the system won’t be able to regulate or monitor gas flow. Be sure to keep an eye on it and clean it often to avoid issues.
You can also do other preventive maintenance. For example, adjusting the gas pressure and inspecting gas connections make sure your furnace is safe.
Steps to troubleshoot furnace blower not turning on
To troubleshoot a furnace blower that’s not turning on, start with ensuring your safety with the right precautions. Inspect the blower motor and its components followed by checking the electrical power to them. For further troubleshooting, test the thermostat wiring and the safety devices. Inspect the airflow system as it may also cause issues. If you can’t find any solution, the last option is to get help from a service tech who can assist you.
Safety precautions before starting troubleshooting
Before starting troubleshooting, safety is key. Here are a few safety measures to take:
- Turn off all power sources, such as gas, electric or oil.
- Always wear protective gear like gloves, face masks and goggles.
- Check for any gas or carbon monoxide leaks.
- Avoid touching exposed wiring, as it can be hazardous.
- If unsure, call an expert.
These steps are just a start. Regular maintenance can help prevent technical issues. A clogged filter can block air flow, causing the furnace to overheat and need expensive repairs.
Inspect the blower motor and its components
Furnace systems often have blower motor failure. If the blower’s not turning on, inspect the motor and components. Follow these 5 steps:
- Turn off the power.
- Locate the motor and remove its cover.
- Look for damage or debris.
- Use a multimeter to check voltage across motor terminals.
- Replace any faulty parts using troubleshooting manuals
Image: Troubleshooting a Blower motor of a furnace
If unfamiliar with this repair work, hire a pro. To stay ahead of breakdowns, regularly maintain the system: clean/replace filters, inspect insulation, clean blowers and burners, etc. Before blaming the blower, double-check the electrical connection.
Check the electrical power to the blower
The blower not turning on can be a significant discomfort. Before calling a technician, homeowners can take some steps to troubleshoot.
A key step is to check the electrical power supply to the blower. This could be disrupted by various factors, including power outages or tripped circuit breakers. To check power supply:
- Locate the circuit breaker panel.
- Check if any circuit breaker is tripped or switched off.
- Reset by switching it back on.
- Use a multimeter to check if electricity is coming into the furnace.
- If there is no electricity, contact an electrician.
Remember to turn off all power sources before troubleshooting. Check other areas connected to the circuit breaker panel too.
Test the thermostat and its wiring
When the furnace blower won’t turn on, it can be both annoying and cold. The thermostat and its wiring could be the cause. Here’s how to troubleshoot this issue:
- Switch off power to the furnace.
- Carefully take down the thermostat from its wall-mounting plate.
- Use a screwdriver to remove the cover plate of the thermostat.
- Check all electrical connections from the thermostat’s base plate. Make sure they are properly screwed in.
Look out for corroded wires or broken connections that need replacing. Then, mount the thermostat back into its plate and turn the furnace on to see if it works. You should also watch for other signs like fuel-related problems with gas valves or inadequate air flow in the heating system.
Test the safety devices
Testing the safety devices in a furnace is essential for home safety and efficiency. Neglecting this leads to costly repairs and even danger. Here are simple steps to test and troubleshoot:
- Check the air filter – Could restrict airflow and make the safety switch shut off.
- Examine the limit switch – Ensure it’s set right and not damaged/corroded.
- Test the pressure switch – Use a multimeter or hire a pro.
- Inspect flame sensor/thermocouple – Clean with sandpaper or replace if faulty.
- Turn off power supply – Do it from both the circuit breaker and furnace before testing electrical components.
- Reset safety shut-off switches – Wait 30 minutes if tripped due to overheating.
Regular maintenance from a pro technician to inspect all components, including safety devices. Follow these steps and you can effectively troubleshoot any blower issues while keeping your family safe and warm. Take a deep breath and inspect the airflow system. If the furnace is blowing hot air like a dragon, step away slowly.
Inspect the airflow system
Efficient furnace operation is important for warm winter homes. If the blower won’t turn on, checking the airflow system can help.
- Disconnect power and gas – safety first!
- Take a look at the air filter and clean or replace. Check vents and ducts for blockages.
- Turn the power on and test airflow at different vents. Check the HVAC system.
- Call a pro for help. No shame in seeking an expert.
It’s important to inspect and fix your furnace quickly before damage occurs. Don’t delay – call a specialist now.
Consult a service tech if none of the above steps work
When troubleshooting a furnace blower that won’t turn on, there are a few steps you can take. Yet, if none of them work, it may be time to get help from a professional service technician. Here’s a guide to do that:
- Research some good HVAC companies in your locality that offer furnace repair services. Check for customer ratings and reviews.
- Set up a meeting with the company. Clarify any fees or charges before scheduling an appointment.
- Provide the technician with all details about your furnace’s symptoms and any maintenance done so far.
Consulting with a pro can save your time, money, and any damage during DIY attempts. Furthermore, they know how to handle different HVAC units and can identify the problem quickly with their expertise. According to Consumer Reports, a certified technician from North American Technician Excellence (NATE) can increase the chances of proper installation and timely repairs. Wear gloves when handling the blower motor parts – no one wants a hospital trip from a DIY project!
How to repair or replace faulty blower motor parts?
To repair or replace faulty blower motor parts with the solutions like repairing or replacing a bad capacitor, a bad control board, a bad fan limit switch, a bad motor module, and a bad blower wheel, you need to follow some steps. In this section, we will provide you with step-by-step instructions on how to diagnose and repair faulty blower motor parts, and when it’s time for a replacement.
Repairing or replacing a bad capacitor
Parts of blower motors are essential for cooling systems. A bad capacitor can cause issues. To repair or replace a faulty one, follow these simple steps:
- Find the capacitor in the blower motor unit.
- Use a multimeter to check if it’s defective. Short the capacitor with an insulated screwdriver to release stored charges, if necessary.
- Replace with a new one of the same voltage and capacitance ratings, using a solder gun
Image: Capacitor of a furnace
Be sure to dispose of the old capacitor safely, and double-check connections before restarting the power. Capacitors carry electric charge and must be handled with care. If unsure, get professional help.
Repairing or replacing a bad control board
Replace or repair a faulty control board for smooth blower motor functioning. Follow these steps:
- Shut off the power. Before starting, make sure the power supply is off.
- Find the control board. It’s usually near the motor.
- Pull out the bad board. Gently take it out of its socket.
- Put in the new board. Ensure it fits snugly.
- Turn on the power. Check your motor runs efficiently.
We must mention that wiring issues can also affect motor performance. If it continues after replacing/repairing, get help right away. Also, remember to wear protective gear when handling electrical stuff.
Repairing or replacing a bad fan limit switch
If your HVAC system is blowing air inconsistently or not at all, it could be a bad fan limit switch. You can fix or replace it yourself with the right tools and knowledge. Here’s a 6-step guide:
- Turn off power to the furnace.
- Locate the blower motor and carefully remove the access panel.
- Find and identify the fan limit switch – it should be a rectangular box with wires.
- Use a multimeter to check continuity between terminals. If there is none, the switch needs replacing.
- Depending on your skills, either repair (solder any broken wires) or replace the switch.
- Once repaired or replaced, reassemble and turn on power to test.
If you’re not confident, call in a professional. Also check if there are other underlying issues before focusing solely on the fan limit switch. Get your system running smoothly again.
Repairing or replacing a bad motor module
When a blower motor module isn’t working, repair might be the best option. Here’s a guide:
- Check power and connections.
- Unplug connectors and secure them with screws. Replace with the same model.
- Tighten screws, reconnect wires and test motors.
Remember to pick a suitable replacement part. And use insulated tools when dealing with electricity. Also, some motors need oil or grease on bearings. Check if yours needs lubrication.
Repairing or replacing a faulty blower motor requires skill and attention to detail. Identify the issue and take measures before reinstalling.
Replacing a bad blower wheel
Don’t let a faulty blower wheel cause you headaches. Here’s how to replace it:
- Shut off the power supply to the air handler unit.
- Pop off the blower access panel and unhook wiring.
- Unfasten and take out the blower from its housing.
- Locate the shaft set screw.
- Use the appropriate tool to loosen the set screw and slide off the old blower wheel.
- Put in a new blower wheel by sliding it onto the motor shaft, tightening the set screw, and reassembling in reverse.
Safety first! If you’re not sure about electrical repairs, it’s best to get professional HVAC technicians to help.
Additional tips and insights to prevent furnace blower issues
To ensure that you don’t encounter issues with your furnace blower at the most inopportune moment, it’s important to keep up regular maintenance and cleaning. In addition to this, you should check for proper ventilation and the correct sizing of the blower motor and fan. You’ll also want to verify that the blower motor and its components have been installed properly. However, it’s equally important to know when issues are beyond your technical capabilities and to call for professional help when needed.
Regular maintenance and cleaning
Ensure a long-lasting, efficient performance from your furnace blower by maintaining and cleaning it regularly. Neglecting this upkeep can lead to breakdowns, even health hazards. Here are five tips to keep it tip-top:
- Replace the filter with a pleated one
- Clean the wheel and motor with a brush or vacuum
- Check the drive belt
- Inspect the pulleys for looseness/cracks, and lubricate them with high-temp oil
- Dusty environments may cause dirt build-up; locate and solve problems quickly
Specialists have modern tools that help with efficient cleaning and maintenance. Don’t wait until it’s problematic; schedule routine maintenance instead. Watch out for strange noises or weak airflow – these could be signs of failure. Follow these tips to save time and money, while enjoying healthy, cozy air. Reach out to professionals for further assistance; they have high-quality equipment.
Checking for proper ventilation
Proper ventilation is key for your furnace blower to function well. Blockages in the vents can cause increased pressure, leading the system to turn off. To avoid this, inspect and clean the furnace vents regularly. Clear them of debris and dust, and keep them free of obstructions.
If you have an air filter, replace it as recommended by the manufacturer. Homeowners often forget to check the airflow rate of their furnace vents. It’s important to guarantee enough airflow around the furnace, since restricted airflow puts strain on the motor and can cause premature failure.
Neglecting maintenance can put stress on your HVAC system when you least expect it. Carbon monoxide poisoning due to blocked chimney stacks are preventable. Regular maintenance checks will keep your family safe and ensure your furnace blower runs efficiently for a long time.
Checking for correct sizing of the blower motor and fan
Size the blower motor and fan properly. It helps your furnace run well and lowers repair chances. Here’s a 4-step guide:
- Check the owner’s manual for motor and fan sizes.
- Measure the blower compartment’s length and width.
- Compare rated airflow volume with manufacturer’s specs.
- Consult an HVAC pro to match the blower assembly’s needs and horsepower.
Replace faulty or worn-out parts with suitable ones. It boosts heating efficiency and avoids strain on other components. Choose highly efficient motors, too. They can save energy costs in the long-run. Regular maintenance checks by pro’s are important. It could help prevent safety hazards caused by faulty equipment.
Checking for proper installation of the blower motor and its components
Checking for proper installation of your furnace blower motor and its components is key to avoiding expensive repairs. Here’s a quick guide:
- Turn off power.
- Remove panels covering the blower compartment.
- Inspect components, checking they are mounted, secured and wired according to instructions.
- Clean the blower compartment with a soft brush or cloth as dust build-up can cause inefficiency or overheating.
- Look out for frayed wires, corroded connections or any other damage.
Regular checks help extend the life of your furnace blower motor and prevent heating disasters in winter. Unless you’re a DIY guru, always call a pro!
Knowing when to call for professional help
When it comes to furnace blower problems, there are signs to look out for. Strange noises, reduced airflow, or inconsistent temperatures, even with regular maintenance and filter changes, are all reasons to call in an expert.
An HVAC technician can accurately diagnose and fix the issue. DIY repairs can be dangerous and cause more damage.
Preventative maintenance is better than reactive repairs. Regular check-ups with a qualified technician can help find potential issues before they become major. This extends the life of your furnace blower and saves money.
Electrical components like fuses demand special attention. Before any repairs or replacements, turn off power at the circuit breaker. Taking care of your blown fuse quickly, plus finding ways to stop them happening again, will keep your furnace running great all winter.