How to Change Fahrenheit to Celsius on Fujitsu Remote: A Comprehensive Guide


Switching the temperature display from Fahrenheit to Celsius on a Fujitsu remote can be a bit tricky, but with the right steps, it’s a straightforward process. This comprehensive guide will walk you through the exact steps, provide technical specifications, and offer unique perspectives to help you master this task with ease.

Preparing the Fujitsu Remote

how to change fahrenheit to celsius on Fujitsu remoteImage source: Fujitsu AC by Dinkun Chen

Before you begin the process of changing the temperature display, ensure that the Fujitsu remote is turned off. This is a crucial first step, as it sets the stage for the subsequent actions.

Accessing the Temperature Display Mode

  1. Locate the Temperature Raise Button: The temperature raise button is typically situated on the right side of the Fujitsu remote control. This button is responsible for increasing the set temperature on the air conditioning unit.

  2. Hold Down the Temperature Raise Button: Once you’ve identified the temperature raise button, hold it down for an extended period, approximately 7-10 seconds. This action will activate the temperature display mode, allowing you to switch between Fahrenheit and Celsius.

Selecting Celsius

  1. Release the Temperature Raise Button: After holding down the button for 7-10 seconds, you should see the “F” or “C” symbol appear on the display. At this point, release the temperature raise button.

  2. Press the Temperature Raise Button Again: Immediately after releasing the button, press the temperature raise button again. This action will allow you to select the “C” option, which represents the Celsius temperature display.

Technical Specifications

The Fujitsu remote control utilizes an infrared communication system to interact with the air conditioning unit. The temperature display system on the remote can switch between Fahrenheit and Celsius, providing users with the flexibility to choose their preferred temperature unit.

The temperature raise button plays a crucial role in this process. When held down for an extended period, it activates the temperature display mode, allowing the user to toggle between the two temperature units. This functionality is a unique feature of the Fujitsu remote control, designed to cater to the diverse preferences of users.

Unique Perspectives

Many users find the process of switching between Fahrenheit and Celsius on the Fujitsu remote to be a bit challenging. The key to success lies in the timing of the button presses. Holding the temperature raise button for the right duration, around 7-10 seconds, is essential to accessing the temperature display mode. Once the “F” or “C” option appears, releasing the button and pressing it again to select the desired unit is the final step.

It’s important to note that the timing of the button presses may vary slightly depending on the specific model of the Fujitsu remote control. Some users have reported that the process may take a few attempts to get the timing right, but with practice, it becomes a seamless task.


If you encounter any issues during the process of changing the temperature display, consider the following troubleshooting steps:

  1. Ensure the Remote is Turned Off: Double-check that the Fujitsu remote is turned off before attempting to access the temperature display mode.

  2. Verify the Temperature Raise Button: Ensure that you are pressing the correct button, the temperature raise button, located on the right side of the remote.

  3. Adjust the Timing: If the “F” or “C” option does not appear after 7-10 seconds of holding the button, try adjusting the timing slightly, either holding the button for a longer or shorter duration.

  4. Check the Remote’s Batteries: Weak or depleted batteries in the Fujitsu remote can sometimes cause issues with the button responsiveness. Replace the batteries and try the process again.

  5. Consult the Manufacturer’s Instructions: Refer to the manufacturer’s instructions or user manual for your specific Fujitsu remote model, as the process may vary slightly between different models.

By following these troubleshooting steps, you can ensure a successful transition from Fahrenheit to Celsius on your Fujitsu remote.


Mastering the art of changing the temperature display from Fahrenheit to Celsius on a Fujitsu remote is a valuable skill for any user. This comprehensive guide has provided you with the necessary steps, technical specifications, and unique perspectives to make this process a breeze. Remember to practice the timing of the button presses, and don’t hesitate to refer to the troubleshooting tips if you encounter any issues. With this knowledge, you can now confidently adjust your Fujitsu remote to display the temperature in your preferred unit.


  1. Whirlpool Forum Discussion on Changing Fahrenheit to Celsius
  2. YouTube Tutorial: Changing Fahrenheit to Celsius on Fujitsu Remote
  3. Additional YouTube Tutorial: Switching Temperature Units on Fujitsu Remote