How to Ignite a Red Stone Propane Heater: A Comprehensive Guide

Igniting a Red Stone propane heater can be a straightforward process, but it’s essential to follow the proper steps to ensure safe and efficient operation. This comprehensive guide will walk you through the step-by-step process, provide technical specifications, and offer troubleshooting tips to help you get your Red Stone propane heater up and running.

Preparing the Heater for Ignition

Before you begin the ignition process, ensure that the propane supply line is connected and turned on. Locate the red igniter button, which should be situated beneath the middle bridge on the heater. Test the igniter button by pressing it and observing for a spark. This will confirm that the ignition system is functioning correctly.

Igniting the Pilot Light

Turn the gas valve knob to the “pilot” position.
Press and hold the igniter button while simultaneously pressing and holding the gas valve knob in the pilot position.
Continue holding the gas valve knob for at least 20 seconds after the burner ignites. This ensures a stable flame.
After the 20-second hold, turn the gas valve knob counterclockwise to the desired temperature setting.

Technical Specifications

The Red Stone propane heater requires a 120V 60Hz power outlet for operation.
The heater is equipped with an overheat protection feature, which may trigger if the heater is left on for an extended period.
Always use the heater in an upright position with the caster wheels attached.
Insert 2 AAA batteries into the remote control before use (batteries not included).
The heater has a maximum BTU output of 30,000 BTU/h, providing ample heating power for medium-sized spaces.
The heater’s dimensions are 24.8 inches (L) x 12.6 inches (W) x 26.8 inches (H), making it a compact and versatile option for indoor use.
The heater’s weight, including the propane tank, is approximately 35 pounds, making it easy to move and reposition as needed.

Troubleshooting Tips

If the heater fails to operate, check the following:

Ensure the power cord is properly connected to a 120V 60Hz power outlet.
Verify that the main power switch is in the “On” position.
Check the battery in the remote control and replace it if necessary.
Ensure the propane tank is not empty and that the supply line is securely connected.
Confirm that the gas valve knob is turned to the correct position (pilot or desired temperature setting).

Remember, always keep combustible materials at least 3 feet away from the heater and use the heater only for its intended household use as described in the manufacturer’s manual.

DIY Approach

For a DIY approach to igniting your Red Stone propane heater, follow these steps:

Gather the necessary tools and materials, including the heater, propane tank, and a wrench to connect the supply line.
Connect the propane tank to the heater, ensuring a secure and safe connection.
Follow the steps outlined in the “Igniting the Pilot Light” section to ignite the heater.

Conclusion

By following the detailed instructions and technical specifications provided in this guide, you can confidently ignite your Red Stone propane heater and enjoy its warmth and comfort. Remember to always prioritize safety and follow the manufacturer’s recommendations to ensure the longevity and proper functioning of your heater. Happy heating!