How to Light Dyna-Glo Delux Propane Heater: A Comprehensive Guide

Lighting a Dyna-Glo Delux propane heater may seem daunting, but with the right steps and precautions, it can be a straightforward process. This comprehensive guide will walk you through the detailed instructions, technical specifications, and essential safety tips to ensure a safe and efficient operation of your Dyna-Glo Delux propane heater.

Preparing the Dyna-Glo Delux Propane Heater for Ignition

Before igniting your Dyna-Glo Delux propane heater, it’s crucial to perform a thorough inspection and safety check. Here’s what you need to do:

Check for Gas Leaks: Open the access door by turning it clockwise until tight. Use a 50% soap water solution at the joint of the regulator and the cylinder to check for gas leaks. If bubbles appear, it indicates a gas leak, and you should not proceed with the ignition process. If there are no bubbles, you can move on to the next step.
Inspect the Heater: Visually inspect the heater for any signs of damage or wear and tear. Ensure that all components are in good condition and properly connected.
Clear the Area: Make sure the area around the heater is clear of any combustible materials, such as furniture, curtains, or paper. The heater requires a minimum clearance of 36 inches from combustible materials in all directions.
Ensure Proper Ventilation: Verify that the heater is placed in a well-ventilated area to allow for proper air circulation and prevent the buildup of harmful gases.

Igniting the Pilot Flame

Once you’ve completed the preparatory steps, you can proceed to ignite the pilot flame on your Dyna-Glo Delux propane heater. Follow these instructions carefully:

Push and Hold the Control Knob: Push and hold the control knob for 30 to 60 seconds while pushing the control knob.
Turn the Knob to the Pilot Position: Turn the knob counterclockwise to the pilot position.
Repeat Until the Pilot Flame Lights: Repeat the process of pushing and holding the control knob until the pilot flame lights.
Hold the Knob in the Pilot Position: Once the pilot flame is lit, hold the control knob in the pilot position for 15 to 30 seconds.
Release and Adjust the Knob: Release the knob, then compress and turn it to the desired heat setting.

Lighting the Dyna-Glo HeatAround360 with a 1 lb. Propane Tank

If you have a Dyna-Glo HeatAround360 model with a 1 lb. propane tank, the ignition process is slightly different. Here’s how to light it:

Connect the Propane Tank: Securely attach the 1 lb. propane tank to the heater. Ensure that the connection is tight and secure.
Check for Gas Leaks: Use a 50% soap water solution at the joint of the regulator and the cylinder to check for gas leaks. If bubbles appear, there is a gas leak, and you should not proceed.
Ignite the Pilot Flame: Follow the same steps as above to ignite the pilot flame: push and hold the control knob for 30 to 60 seconds, turn the knob counterclockwise to the pilot position, and repeat until the pilot flame lights. Once lit, hold the control knob in the pilot position for 15 to 30 seconds, then release and turn to the desired heat setting.

Technical Specifications of the Dyna-Glo Delux Propane Heater

To ensure safe and efficient operation, it’s essential to understand the technical specifications of your Dyna-Glo Delux propane heater:

Specification	Value
BTU Input	125,000 BTUs
BTU Output	115,000 BTUs
Minimum Clearance from Combustible Materials	36 inches in all directions
Dimensions	18.5 x 11 x 21.5 inches
Weight	22.5 pounds
Maximum Coverage Area	3,500 square feet

DIY Tips for Lighting the Dyna-Glo Delux Propane Heater

Here are some additional tips to keep in mind when lighting your Dyna-Glo Delux propane heater:

Always Check for Gas Leaks: Perform the soap water solution test at the regulator and cylinder connection before each use to ensure there are no gas leaks.
Secure the Propane Tank Connection: Make sure the propane tank is securely attached to the heater, and the connection is tight and secure.
Follow the Manufacturer’s Instructions: Carefully read and follow the manufacturer’s instructions for your specific Dyna-Glo Delux propane heater model. This will ensure safe and proper operation.
Maintain the Heater: Regularly inspect and maintain your Dyna-Glo Delux propane heater to keep it in good working condition and prevent any safety issues.

By following these detailed instructions, technical specifications, and DIY tips, you can safely and confidently light your Dyna-Glo Delux propane heater and enjoy its warmth and comfort throughout the colder months.