How to Reset Lasko Space Heater: A Comprehensive Guide

Resetting a Lasko space heater is a straightforward process that can help restore its proper functioning. This guide will provide you with a detailed, step-by-step approach to resetting your Lasko space heater, along with technical specifications, troubleshooting tips, and references to ensure you have a comprehensive understanding of the process.

Unplugging and Cooling Down the Heater

The first step in resetting a Lasko space heater is to unplug the unit from the electrical outlet. This is a crucial safety measure, as it ensures that the heater is completely disconnected from the power source. Once the heater is unplugged, you should wait for at least 10 to 15 minutes to allow the unit to cool down completely.

The reason for this waiting period is to allow the thermal overload protection feature to reset. Lasko space heaters are equipped with this feature, which is designed to prevent the heater from overheating and posing a fire hazard. By allowing the heater to cool down, the thermal overload protection can reset, and the heater can be safely powered on again.

Checking the Electrical Outlet

how to reset lasko space heater

After the heater has cooled down, the next step is to ensure that the electrical outlet is functioning properly. Plug the heater into a different outlet or in a different room to rule out any issues with the previous outlet. If the heater still does not work, you can test the outlet with another appliance to confirm that it is providing power.

If the outlet is not working, you may need to check for a tripped circuit breaker or a blown fuse. Reset the circuit breaker or replace the fuse as necessary to restore power to the outlet.

Adjusting the Temperature Setting

Many Lasko ceramic personal heater models come with internal thermostats that regulate the temperature. If the temperature in the room matches or exceeds the preset temperature on the space heater’s thermostat, the Lasko heater will not turn on until the room cools down.

To address this issue, you should review the temperature setting on the heater and adjust it as needed. Ensure that the desired temperature is set lower than the current room temperature to allow the heater to turn on and function properly.

Cleaning the Heater

Dirt buildup on the Lasko space heater can also cause it to run for a few minutes and then shut off repeatedly. To clean the heater, follow these steps:

  1. Unplug the unit from the electrical outlet.
  2. Use a vacuum cleaner to remove any dust or debris from the surface of the heater, including the heating elements and air vents.
  3. Use an old toothbrush to gently brush away any stubborn dirt buildup.
  4. Wipe the surface of the heater with a soft cloth to remove any remaining dirt or dust.
  5. Plug the heater back into the electrical outlet and test it to ensure it is functioning properly.

Contacting Lasko Technical Assistance

If the above troubleshooting steps do not solve the problem, it may be necessary to contact Lasko Technical Assistance for further assistance. Lasko’s customer support team can be reached at 1-800-233-0268 and can provide additional guidance on resetting your Lasko space heater or addressing any other issues you may be experiencing.

Technical Specifications

  • Lasko space heaters come with internal thermostats that regulate the temperature.
  • The thermal overload protection feature prevents the heater from overheating and posing a fire hazard.
  • Dirt buildup may cause the heater to run for a few minutes and shut off repeatedly.
  • Lasko space heaters have a power output range of 1500-1800 watts, depending on the model.
  • The heaters typically have a temperature range of 50°F to 85°F (10°C to 29°C) and can heat spaces up to 300 square feet.
  • The dimensions of Lasko space heaters vary by model, but they generally measure between 6-12 inches in width, 8-15 inches in depth, and 12-20 inches in height.
  • The weight of Lasko space heaters ranges from 5 to 15 pounds, depending on the size and features of the model.

DIY Steps

  1. Unplug the heater and wait for at least 10 to 15 minutes for it to cool down completely.
  2. Plug the heater into a different outlet or in a different room.
  3. Ensure that the heater is properly plugged in and that the outlet is working.
  4. Review the temperature setting and adjust as necessary.
  5. Clean the heater if necessary by unplugging the unit, vacuuming all elements of the surface, and brushing away any stubborn dirt buildup with an old toothbrush.